Spice Rack

This is just a quick and dirty spice rack I put together for my wife. It’s a piece of plywood (supported at an angle by a chunk of 2×4) with some maple cleats glued and stapled to the front. Figuring out the size and placement of the cleats took the longest (Thanks Ben and Eric), but the entire project only took an hour or so. I wasn’t originally going for a documented tutorial, so the pictures are just of the finished product. Someone else’s measurements would vary anyhow, given the sizes of their cupboard and its contents. It’s the thought that counts, right?

New Ryobi Tool Center

It’s been a few months now, but I’m finally getting to documenting the tool storage wall we built. I found a plan online to build some PVC drill/driver hangers, and adapted it to carry the grinder, glue gun and angle drill by their battery holders.

All the tools in one place!

The slanted pipes below the drills are some spare PVC cemented to a piece of Sintra (which is also PVC, so I used pipe solvent). These tubes, which have since been labeled, hold cylindrical tools, such as our rotary and oscillating multitools and apparently a caulk gun.

If you’re in the market for some drill hangers for yourself, we have a fancy jig built (for 3″ pipe, but 4″ works too), so c’mon down and build some for yourself!

Banker’s Box Storage Plans


For years, our makerspace has used a hodgepodge of solutions for storing members’ projects in progress and other personal belongings.  Most recently, we’ve used a dozen or so plastic totes.  The totes worked great, but were limited in quantity (they were industrial waste, and no more matching totes were available) so that not everyone could have one.  Additionally, these totes were slightly trapezoidal, which wasted quite a bit of space between them.

To that end, Ben and Kevin undertook a project to convert personal storage to standard Letter/Legal Banker’s Boxes, which are readily available and pack more densely.  They are a bit smaller than the totes we were using, but most members totes weren’t full, and we can store twice as many boxes in the same space.

Read on for full plans and assembly instructions.

Continue reading